9x8-Ft. Step and Repeat Adjustable Backdrop: Versatile and Portable
- High-Definition Graphics
- Robust Hardware Construction
- Lightweight and Portable
- Easy Installation & Setup
About 9 ft x 8 ft Step and Repeat Adjustable Banner Stands
   Frequently Asked Questions and Answers
-
Can Back Drop hardware adjust to a different size range?
Yes, Back Drop adjustable size ranges are Width: 69”-129”, Height: 36”-102”.
-
Do you have a Back Drop installation guide?
Yes,View Back Drop installation guide.
-
How to setup artwork files for Back Drop - Large Tube?
Your submitted graphic should fit the exact dimensions of the print you ordered. There are 3” pole pockets at the top and bottom of this graphic. The seams from the hemmed pole pocket will be visible 3” from the top and bottom of the graphic.
Installation GuideStep 1: Connect the two poles labeled #A-B by joining the B-B ends. Repeat with bottom poles #C-D. Extend telescopic ends A. Step 2: Take vertical pole #A-C and insert end C into the pole socket in the base. From the bottom of the base thread hexbolt into end C and tighten. Step 3: Run poles #A-B and #C-D through the pole pockets on the top and bottom of the graphic. Step 4: Use the black handled thumb screws to secure the horizontal poles to the vertical poles. |